• 24" High Velocity Drum Fan with SAA/CE for Africa
  • 24" High Velocity Drum Fan with SAA/CE for Africa
  • 24" High Velocity Drum Fan with SAA/CE for Africa
  • 24" High Velocity Drum Fan with SAA/CE for Africa
  • 24" High Velocity Drum Fan with SAA/CE for Africa
  • 24" High Velocity Drum Fan with SAA/CE for Africa

24" High Velocity Drum Fan with SAA/CE for Africa

Port: Zhongshan, China
Production Capacity: 1500PCS/Day
Payment Terms: L/C, T/T
Remote Control: Without Remote Control
Power Source: Electric
Material: Metal
Installation: Floor Stand
Certification: CSA, CCC, SAA
Finish: Black/Silver

You Might Also Like

Loading...

Basic Info.

Model NO.
DF-60
Wheel
Rubber Wheel
Voltage (V)
220-240
Watts
250W
Speed
3 Setting
Air Speed
10m/S
Terp-Rise
Less 55K
Motor
100% Copper
Rpm
1350/1050/950
Air Flow
5250/7200cfm
Trademark
AIRMAKER
Transport Package
Carton Box
Origin
China
250W 24" High Velocity Drum Fan KTY-60 with SAA /CE/CB

* 5250/7200CFM air flow
* Commercial grade with grounded power cord
* Thermal overload protection
* Low and high speeds
* Two carry handles and built-in wheels for portability
* Powder coated for long life
Product Parameters
Technical ParametersRating voltage120V
Rating frequency60HZ
Rating current2.0A
Rating input watt226w
Highest CFM7200 CFM
Highest RPM1050 RPM
Packaging Quantity1
Gross weight38.14KG
Net weight29.76KG
Dimension690x300x725MM
Load quantity40' container408
40'H container451
ColorSilver, black
CertificationsSAA
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa24" High Velocity Drum Fan with SAA/CE for Africa

24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa
24" High Velocity Drum Fan with SAA/CE for Africa


ASSEMBLY INSTRUCTIONS

BASE AND PILLAR ASSMBLY
1.Take our base and pillar part from the carton.

2.Revolve the height adjustor anti-clock wisely out,draw the steel tube out of the pillar.Then revolve the height adjustor clock-wisely to fasten it.

3.Locate the pillar proper into the base,take the screw nut from the plastic bag and fit if to the pillar from the bottom of the base and fasten it.

4.Adjust the height adjustor to meet you requirement of the height of the wind sending.

FAN BODY AND COLUMN ASSEMBLE


Unscrew the fixing knob on the back of the bottom of fan body,emptied the hole in the bottom of fan body,put extension column into the hole of the fan body,then tighten the fixing knob.

BLADE AND GRILLES ASSEMBLY

1.Remove the spinner and the plastic nut  from the front side of the motor shaft then tighten the plastic nut.

2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of the blade.Screw the spinner counter clockwise to tighten the blades.

3.Hold the front guard to make sure that  the trade mark is level and that the front guard are centered over the rear guard.Then push all the safety clips firmly into place.

OPERATION INSTRUCTION

Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off  1-low  2-medium  3-high

OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob
.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.

MAINTENANCE INSTRUCTIONS
The fan requires little maintenance.Do not try to fix it by yourself,refer it to qualified service personnel if service is required.
1.Before cleaning and assembling,do not plug the pins into the socket.
2.To ensure adequate air circulation to the motor,keep vents at the rear of the motor housing room dust,fluff and etc,A vacuum cleaner can not be used to clean these vents before unplug.Do not disassemble the fan to remove fluff.
3.Please wipe the exterior ports with a soft cloth soaking a mild detergent.Do not use any abrasive detergent or solvents to avoid scratching the surface.
4.Do not allow water or any other liquid in to the motor housing or interior parts.
5.If the power cord is damaged,it is strongly recommended to request a specialist to handle.



 
 
Company profile
     Zhongshan Airmaker Electrical Appliances Co.,Ltd was established in July, 2009.We are one of professional appliance manufacturer in China ,our main products cover metal fan /plastic fan /mist fan/air cooler/air purifier and so on. It advocates pragmatic, high efficient and interactive working attitude; people-oriented, keeping improving, self-inspection working standard and harmonious working atmosphere.

      Our factory is located in Sanjiao town, Zhongshan city withconvenient transportation. We introduced advanced equipment, checkout equipment and excellent manufacturing technique. Airmaker pays more attention to R&D ability. Since establishment, we insist on "Customers first and continuous improvement". We also have shaped unique philosophy and culture in our development process, especially, we have received good reputation from many customers due to our philosophy of 'health & nutrition".

      Airmaker has a professional R&D team and introduces the international advanced develop and design instruments. It commits to be healthy and nutrient home appliance expert by insisting to design creative appearance and technical-oriented products. It pays attention to scientific management and quality of product by following ISO9001 and 5S management to achieve standardized and large-scale production.

      Based on the honesty operation, our products export to Europe, USA,South Africaand others inSouth-east Asiaand so on.. We have the energetic sales team and dedicated in the sales of various fans in order to make the customers enjoy life.

      Airmaker has been sticking itself to the principle of being a one-hundredEnterpriseby team hard work and pursuing zero-defect products . We will provide the customer with the best quality, competitive price, professional technology and share with our customer "win-win".

Send your message to this supplier

*From:
*To:
avatar Mr. Frank Lee
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now